Accessorize your sea container with vents, hooks, brackets, and columns to make a mezzanine.
Adjustable angle allows for use as a shelf, or a pipe and tube rack. Supply your own 2x10 planking to make shelving. Mounting hardware included. Galvanized finish for outdoor use. Patent Pending.
Adjustable angle allows for use as a shelf, or a pipe and tube rack. Supply your own 2x10 planking to make shelving. Mounting hardware included. Galvanized finish for outdoor use. Patent Pending.
KWIK-STOR carries the full line of KW series container shelving. We offer multiple sizes in depth, width and height as well as decking options like wood, steel or wire mesh. Do just one side or both to maximize your container's capacity. Contact us and we can send you the full PDF price list.
The kit includes one 54" wide tire slat assembly and two tube holders. Purchase columns and 22" arms separately. Included tube holders are mounted to the end of the 22" arms to hold 1 3/8" diameter steel tubes (not included). This tubing is economically available at any Home Depot or Lowes (referred to as 1 3/8" fence top rail). 54" assemblies can be added to extend the full length of the container. Mounting hardware included. Patent Pending.
The Tire Rack Kit consists of:
3 x 7 ft column
6 x 22" arms
3 x support hooks
12 x tube brackets
The 1 3/8" diameter steel tubes are not included. This tubing is economically available at any Home Depot or Lowes (referred to as 1 3/8" fence top rail). Mounting hardware included. Patent Pending.
Capacity - 600 lbs per arm.
Mezzanine kits consist of four support columns, four hook brackets, and 4 support column pockets. Supply your own 2x4 or 2x6 beams, and wood decking for a complete solution. Longer columns allow you to add more levels using the same four columns. Mounting hardware included. Patent Pending.
With 2 ft support column $155
With 5 ft support column $199
With 6 ft support column $215
With 7 ft support column $231
Capacity - 1700 lbs per column.
Add another level to your mezzanine kit. Kit consists of 4 lumber support pockets
Specifically designed to be used with our Column Bracket or Column Hook. Support Columns form the backbone of all of our sea container storage systems. They are available in a variety of lengths, and can be used to mount our shelf arms, or any commercially available A-Track, or E-Track accessory. Galvanized finish allows for outdoor use. Patent Pending.
2 ft - $14.50
5 ft - $25.50
6 ft - $29.50
7 ft - $33.50
Capacity - 1700 lbs per column.
Mount these arms on our Support Columns for an all inclusive shelving, or cantilever rack system. Adjustable angle allows for use as a shelf, or a pipe and tube rack. 14 inches long. Supply your own 2x8 planking to make shelving. Mounting hardware included. Galvanized finish for outdoor use. May be used to support a roof canopy. Patent Pending.
Capacity - 700 lbs per arm.
Mount these arms on our Support Columns for an all inclusive shelving, or cantilever rack system. Adjustable angle allows for use as a shelf, or a pipe and tube rack. 18 inches long. Supply your own 2x10 planking to make shelving. Mounting hardware included. Galvanized finish for outdoor use. May be used to support a roof canopy. Patent Pending.
Capacity - 700 lbs per arm.
Mount these arms on our Support Columns for an all inclusive shelving, or cantilever rack system. Adjustable angle allows for use as a shelf, or a pipe and tube rack. 22 inches long. Supply your own 2x12 planking to make shelving. Mounting hardware included. Galvanized finish for outdoor use. May be used to support a roof canopy. Patent Pending.
Capacity - 600 lbs per arm.
Designed to connect our Support Column to a standard lashing loop on the inside of a sea container. Attach the length of the column that you need, and pivot the assembly into place. Unique design will not allow the hook to be knocked off. Patent Pending.
Capacity - 1700 lbs
This is a standard E-Track accessory that can be used to make a mezzanine, or heavy duty shelf. Easily inserted into any position on our support columns.
Heavy duty 18 ga storage bins designed to mount directly onto our 14" shelf arms. Can join together to run the length of the container. May also be used as a stand alone bin on your own shelving. Bins are 14" front to back, 6" deep and 55" long. The front lip is bent out 30 degrees to improve visibility. Dividers are available, and can be installed every 6". Mounting hardware included. Galvanized finish. Patent Pending.
*Dividers are extra
Capacity - To match shelf arms.
Heavy duty 18 ga storage bins designed to mount directly onto our 18" shelf arms. Can connect to run for the length of the container. May also be used as a stand alone bin on your own shelving. Bins are 18" front to back, 6" deep and 55" long. The front lip is bent out 30 degrees to improve visibility. Dividers are available, and can be installed every 6". Mounting hardware included. Galvanized finish. Patent Pending.
Dividers are extra
Capacity - To match shelf arms.
Heavy duty 18 ga storage bin dividers designed to be used with our 18" bins. The dividers serve as end caps for the bins and can be installed every 6" to provide compartments within the bin. Mounting hardware included. Galvanized finish. Patent Pending.
14" Dividers $17.75 ea
18" Dividers $20.25 ea
These units fit flush in the corrugation of a sea container to provide ventilation due to condensation. Vent holes are small enough to prevent rodents and most insects from entering. Easy to install.
Rear vent specifications:
(WxH) 10x9
Weight 2 lbs
COST $ 16.00 ea
Side vent specifications:
(WxH) 12x9
Weight 2 lbs
COST $ 17.00 ea
These units fit flush in the corrugation of a sea container to provide ventilation due to condensation. Vent holes are small enough to prevent rodents and most insects from entering. Easy to install.
Rear vent Specifications:
(WxH) 10x9
Weight 3 lbs
COST $ 26.00 ea
Side vent specifications:
(WxH) 12x9
Weight 4 lbs
COST $ 28.00 ea
These units fit flush in the corrugation of a sea container to provide ventilation due to condensation. Vent holes are small enough to prevent rodents from entering. Please let us know if it is for the side, rear, or front so we may supply the correct adapter. The trim pieces for either the side or the rear are $10 a pair. Easy to install.
Specifications:
(WxH) 12x12
Weight 5 lbs
A
Copyright © 2023 KWIK-STOR - All Rights Reserved.
Powered by GoDaddy